Rheem Metro Max 50°C 26L Continuous Hot Water Unit 876A26PF *LPG GAS*
Preset at 50°C - *LPG GAS*
Hot water that never runs out. The Rheem 876A26PF 26L Gas Continuous Flow water heater is a compact, higher capacity model that's ideal for homes with limited space, medium to larger sized apartments and homes.
-
Height (mm)519 mm
-
Width (mm)355 mm
-
Depth (mm)188 mm
-
Mpn876A26PF
-
Model number876A26PF
-
Energy efficiency6 Star
-
Product fuelLPG Gas
-
Features
✓ 50°C temperature model - Extra safety ✓ 26L/minute continuous hot water delivery (at 25°C rise) – suitable for 2 bathrooms ✓ Flamesafe overheat protection — shuts down the water heater before overheating can occur ✓ Rheem Q Factor — ensures rapid hot water every time, with none of the fluctuations that occur with some continuous flow units ✓ Remote temperature controller options — so you can set the best and safest temperature for the bathroom and kitchen
-
Manufacturer warranty3 Years
-
InstallationExternal
-
IgnitionElectronic
-
More SpecsSpecification
- Maximum Temperature °C: 50
- Number of Bathrooms: 2 - 2.5
- Gas Type: LPG Gas
- Flow Rate L/Min at 25°C Rise1: 26
- Min Operating Flow Rate L/min: 1.5
- Nominal Gas Consumption MJ/Hr: 199
- Depth – from wall to H/W Outlet: 87
- Depth – from wall to C/W Inlet: 68
- Depth – from wall to Gas Inlet: 77
- Weight (empty) kg: 16
- Max. Water Supply Pressure kPa: 1000
- Min. Water Supply Pressure kPa: 120
- Cold Water Connection: R 3/4
- Hot Water Connection: R 3/4
- Gas Connection: R 3/4
- Kitchen: 299850
- Bathroom 1: 299851
- Bathroom 2: 299852
- Recess Box4: 299427
- Wall Mount Security Kit: 299868
- Security Cage: 299867
- Flue Diverter (Standard)5: 299287
- 12 years parts and 3 Years labour on Heat Exchanger
- 3 years parts & labour on other components, when installed in a domestic dwelling.
- For all other installations, the warranty period is 1 year parts and labour on Heat Exchanger and other components.
* Warranty conditions apply
Please Note: Any hot water unit preset above 50°C requires a plumber to install an approved Tempering Valve on the hot water branch line to the bathrooms to set the water at a maximum of 50°C. This allows for the hotter water to be supplied to the kitchen & laundry which is best for cutting greases and rinsing.1. At 25°C temperature rise. Guide only, subject to ambient water temperature and pressure, correct pipe sizing and appliance flow rates. 2. Warranty: 12 years parts and 3 years labour on Heat Exchanger, 3 years parts & labour on other components, when installed in a domestic dwelling. Conditions apply, for full details and conditions which apply visit www.rheem.com.au/warranty 3. 50°C factory pre-set models supply hot water at a maximum 50°C at all outlets in accordance with AS 3498. Some applications may require tempering, refer to AS/NZS 3500:4. 60°C models must have a tempering valve installed in accordance with AS/NZS 3500:4 4. Installation requirements may vary and alterations to pipework may be required where a recess box is to be installed in an existing external wall. 5. Suitable for Natural Gas models only, check local requirements for compliance before purchasing/installing.
