Rheem Metro Max 50°C 16L Continuous Hot Water Unit 876A16NF *NATURAL GAS*
Preset at 50°C - *NATURAL GAS*
Rheem Metro Max 50°C 16L Continuous Hot Water Unit 876A16NF *NATURAL GAS* is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
Hot water that never runs out. The Rheem Metro Continuous Flow gas water heater is a compact, medium capacity model that's ideal for homes with limited space. It's perfect for apartments and townhouses.
-
Height (mm)519 mm
-
Width (mm)355 mm
-
Depth (mm)188 mm
-
Mpn876A16NF
-
Model number876A16NF
-
Energy efficiency6 Star
-
Product fuelNatural Gas
-
Features
✓ 50°C temperature limited model - Extra safety ✓ 16L/minute continuous hot water delivery (at 25°C rise) suitable for 1.5 bathrooms ✓ Flamesafe overheat protection shuts down the water heater before overheating can occur ✓ Rheem Q Factor ensures rapid hot water every time, with none of the fluctuations that occur with some continuous flow units ✓ Remote temperature controller options so you can set the best and safest temperature for the bathroom and kitchen
-
Manufacturer warranty3 Years
-
InstallationExternal
-
IgnitionElectronic
-
More SpecsSpecification
- Maximum Temperature °C: 50
- Number of Bathrooms: 1 - 1.5
- Gas Type: LPG Gas
- Flow Rate L/Min at 25°C Rise1: 16
- Min Operating Flow Rate L/min: 1.5
- Nominal Gas Consumption MJ/Hr: 126
- Depth – from wall to H/W Outlet: 87
- Depth – from wall to C/W Inlet: 68
- Depth – from wall to Gas Inlet: 77
- Weight (empty) kg: 16
- Max. Water Supply Pressure kPa: 1000
- Min. Water Supply Pressure kPa: 120
- Cold Water Connection: R 3/4
- Hot Water Connection: R 3/4
- Gas Connection: R 3/4
- Kitchen: 299850
- Bathroom 1: 299851
- Bathroom 2: 299852
- Recess Box4: 299427
- Wall Mount Security Kit: 299868
- Security Cage: 299867
- Flue Diverter (Standard)5: 299287
- 12 years parts and 3 Years labour on Heat Exchanger
- 3 years parts & labour on other components, when installed in a domestic dwelling.
- For all other installations, the warranty period is 1 year parts and labour on Heat Exchanger and other components.
* Warranty conditions apply
Please Note: Any hot water unit preset above 50°C requires a plumber to install an approved Tempering Valve on the hot water branch line to the bathrooms to set the water at a maximum of 50°C. This allows for the hotter water to be supplied to the kitchen & laundry which is best for cutting greases and rinsing.1. At 25°C temperature rise. Guide only, subject to ambient water temperature and pressure, correct pipe sizing and appliance flow rates. 2. Warranty: 12 years parts and 3 years labour on Heat Exchanger, 3 years parts & labour on other components, when installed in a domestic dwelling. Conditions apply, for full details and conditions which apply visit www.rheem.com.au/warranty 3. 50°C factory pre-set models supply hot water at a maximum 50°C at all outlets in accordance with AS 3498. Some applications may require tempering, refer to AS/NZS 3500:4. 60°C models must have a tempering valve installed in accordance with AS/NZS 3500:4 4. Installation requirements may vary and alterations to pipework may be required where a recess box is to be installed in an existing external wall. 5. Suitable for Natural Gas models only, check local requirements for compliance before purchasing/installing.
